Brother LH-8250CDN / HL-8350CDW / HL-9200CDW message ‘Replace Toner’ with compatibles

If you have any of these Brother printers below and since fitting a compatible toner are getting a message Replace Toner

Brother LH-8250CDN

Brother HL-8350CDW

Brother HL-9200CDW

Then please follow these instructions:

  • Turn the printer on

  • Open the front cover

  • Press the secure and cancel key at the same time

  • Select the correct toner option to reset by pressing the down arrow

  • Press OK when you find the toner to be reset

  • Press the up arrow to reset

  • Close the front cover

The printer will then as you to wait while it goes through its process. You should come back to the main menu when completed.

Brother use the following index

Black is K,  Magenta is M, Cyan is C and Yellow is Y

TNR = toner

STR = starter cartridge (the toner cartridges that came with your printer)

STD = standard toner or TN341

HC = high yield toner or TN346

IE to reset the TN346K (Black) toner counter you need to select K.TNR.HC.

Was this article helpful?

Related Articles