Reset Gear if “Cartridge Error Put The Toner Back In” “Low Toner” “Replace Toner” comes up with Brother TN-247 or TN-221 Cartridges

Last Updated on July 9, 2021 by Next Century

If you have just fitted a Brother TN-247 or TN-221 compatible toner cartridge and are getting any of the following error messages that are stopping you print:

“Cartridge Error Put The Toner Back In”

“Low Toner”

“Replace Toner”

Then try the following to solve the problem

  • Use tweezers, small nose pliers or a small pen to push the reset gear down with pressure

    TN-247 or TN-221 push reset gear

  • Once you have pushed the reset gear back down, it should look like this

    TN-247 or TN-221 reset gear down

Was this article helpful?

Related Articles